If you mean the short bust (5-10 seconds) of full speed at initial power on, then I don't think there is a way of disabling that.first is it possible to disable the fan running full speed until the system is booted
That is the fan detection routine. It is under control of the firmware. It runs the fan at full speed for a short time and checks that it is getting the correct speed readings. That is how it knows there is a fan connected and is working correctly.
Reason being for that watchdog sometimes restarts at night
All I want to do is set the speed to limit at 1 for 8 hours and let the cpu throttle if necessary
I did make a scrip to constantly set the speed to 1 but it wasn’t quick enough and you could hear the fan trying to speed up for a few milliseconds
Statistics: Posted by kcajminer2312 — Mon Jun 24, 2024 8:55 am