General • (Solved) Cannot get external LED to blink

I have a Raspberry Pi Pico and I am following this tutorial: https://projects.raspberrypi.org/en/pro ... the-pico/6

I can blink the onboard LED without issues, but I cant get the external LED to work. I am using the code from the tutorial and the same wiring; the LED stays off. I have

• Verified that the LED is working.
• Tried a different GPIO.
• Verified that my resistor is 270 Ohms.
• Tried rebooting the pico.
• Verified again that the Pico is executing code (the onboard LED blinks).

What else can I do to debug this?

Statistics: Posted by mf2 — Sat Oct 12, 2024 9:52 am

---