Hello,
The good thing is that I retried to compile the FEATURE-USB-overhaul branch with arm-none-eabi-gcc 13.2.1 on Ubuntu 24.04, and got an UF2!
For my first attempts, I used the RP2350-Support.
There are still warnings about packed structs addresses, but that should be harmless, I hope.
The bad thing is that I don't get any output on my 1024x768 VGA screen...
As I cut the traces on my VGA board PCB to have one serial port and 1-bit SD Card, I tried to activate it and added stdio_init_all() and one printf() to main(), but I got no output on the serial monitor, too.
Could you please upload an UF2 file you compiled somewhere so I can test it on my hardware?
The good thing is that I retried to compile the FEATURE-USB-overhaul branch with arm-none-eabi-gcc 13.2.1 on Ubuntu 24.04, and got an UF2!
For my first attempts, I used the RP2350-Support.
There are still warnings about packed structs addresses, but that should be harmless, I hope.
The bad thing is that I don't get any output on my 1024x768 VGA screen...
As I cut the traces on my VGA board PCB to have one serial port and 1-bit SD Card, I tried to activate it and added stdio_init_all() and one printf() to main(), but I got no output on the serial monitor, too.
Could you please upload an UF2 file you compiled somewhere so I can test it on my hardware?
Statistics: Posted by CHiPs44 — Fri Dec 06, 2024 9:27 pm