Thanks much. There seems to be a few options nowAnother thought about that 52pi PD power board. it comes with a usb C cable to the Pi 5 which does 5V 5A PD so the pi5 usb has all its usb power budget available. As it can produce 40W the other 3A (approx) could be used via the 4 pin output connector (it appears to be a PC Floppy connector) or solder pads. This could do some 5V servos if that works for you, and you MIGHT be able to only need 1 supply depending on the peak currents in the servos.
Seems the laziest option may be to use a power bank that as AC out along with USB out, could use it to power the RPi and also a powered usb hub to run the servos off of
Statistics: Posted by PhoenixRobotics — Fri Jan 10, 2025 3:27 am