Troubleshooting • Re: Pi 5 Not Displaying Over HDMI
What resolution is your screen?It was a 4k TV and a 1440p monitorI just tried a 1080p monitor and that worked, thank you!Is there any way to force the pi to use 1080p? I just tried several things but...
View ArticleOther projects • Re: Remote power control for battery powered Rpi4
Don't forget that the relay would need to stay energised while the Pi is on, so the controller going back to sleep during that period might not be a good idea.It may be preferable to use a latching...
View ArticleGraphics, sound and multimedia • Video acceleration with Kodi on RPi5 with...
I have a RPi5 and want to use it with Kodi. Unfortunately, OSMC still doesn't support it, and LibreElec isn't an option because I need to install packages using APT, so I was considering using Ubuntu...
View ArticleClik here to view.
Compute Module • Re: How does GLOBAL_EN work?
The display is LCD Panel driven by a HDMI to MIPI converter board. I tested it and to turn off the backlight I have to remove power from the board.This is what I came up with. Will this work as I...
View ArticleClik here to view.
Troubleshooting • Re: Raspberry pi 5: usb disk disconnects randomly
]OK strange. i have rpimonitor installed since the beginning, and yesterday, i saw that it said there were several updates on the raspberry pi (i had done a full suite of updates when i first set it...
View ArticleClik here to view.
Troubleshooting • Re: Reading Change Logs stalls at 33%?
Hi, I am kind of a noob in all these stuff, i just bought pi zero 2 w and configured ssh and vnc, but i am having the same problem. Someone said above in the thread that setting swap at 200 fixed it....
View ArticleNetworking and servers • Bramble w/ GPU
I'm building a small bramble (currently planning on 4 Pi4 nodes), and I have an extra older GPU (1070). Would it be at all reasonable or useful to upgrade the head node to a Pi5 to try and incorporate...
View ArticleCompute Module • Board review
Hallo, I'm in the process of ordering a breakout board I made for the CM4. The last one had some problems that I hopefully fixed with this iteration. Could you please verify if there is anything out...
View ArticleTroubleshooting • Many different OSes first boots unsuccessful (RP Zero 2 W)
At first, I chose the "custom image" option in rp imager (kali linux arm) and when trying to burn it on a 128GB micro sd card, it got bricked to the point of no way of fixing it. Then I tried with two...
View ArticleClik here to view.
Graphics, sound and multimedia • Re: C790 HDMI Board with RPi5
Hello Friends,As promised, I'm making available the script to set automatically the HDMI to CIS-2 Cards in RPi5I have posted the script and steps here....
View ArticleTroubleshooting • Re: Many different OSes first boots unsuccessful (RP Zero 2 W)
rpi0 is a low spec device best suited for headless deployment with a non-gui roll.raspberry os lite is the recommended osit has very low ram, after the os uses it's share there's even less ram.your...
View ArticleGraphics, sound and multimedia • Re: Video acceleration with Kodi on RPi5...
no, only raspberry stuff is optimized for rpi'sso you need the raspberry kodi versionalso the latest ubuntu has been broken on rpi's since release.Statistics: Posted by kerry_s — Fri May 24, 2024...
View ArticleClik here to view.
Beginners • Re: TV LCD NO CONNECTION
These is even more strange. I remove the SD Card from the raspberry and pluged in the Hdmi on the TV and it worked, i ogt a image, a BOOT red image doing something. But with the SD card inserted in...
View ArticleTroubleshooting • Re: Headless Display Resolution on Bookworm
Same issue found on Pi 3B+ Qt 6.4.2 clean install.uname -a gives:Linux bgr03 6.6.28+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 GNU/LinuxUsing X11 with RealVNC server Created...
View ArticleTroubleshooting • Re: RPi 3B+ New Card Slot
Yes, that is a 1B+. On a 3B+ It would say "Raspberry Pi 3 Model B+ V1.3" or similar.Statistics: Posted by rpdom — Sat May 25, 2024 11:08 pm
View ArticleOther projects • Re: Power Pi 5 from 12 volt battery
The voltage regulators based on the LM2596S Buck Converter are easy to use and provide a variable resistor that let you drop voltage from 12V to anywhere between 12V and 2V with very precise control....
View ArticleGeneral discussion • Re: RPI NAS with 2x4TB storage: comments please
WoL could be a problem, no matter which Pi you choose.Statistics: Posted by wildfire — Sat May 25, 2024 11:27 pm
View ArticleTroubleshooting • Re: Very Strange Network Behavour!
Hi epoch1970Thank you for your replyI’d get a console on that Pihole machine and look for that IP address. Yes, already did that. As mentioned the only reference I found was within the Pihole binary...
View ArticleHATs and other add-ons • Re: laser module
https://www.amazon.com/Acxico-Arduino-T ... bran689-20 this laser moduleStatistics: Posted by Jason French11 — Sat May 25, 2024 11:52 pm
View ArticleOther projects • Re: Custom Key pad
Very good. I assume you are using the Arduino IDE to write and test your code?The wiring will be identical to the Pico. Don't use I/O pins 0 and 1 as they are used for serial communication. You can...
View Article