New to pi. Have an RPi5 with a wavshare poe hat. Pi seems to get power but flashes 4-long-5-short (which is better than the 4-long-3short fatal error I've seen others get on the 5... hopefully). It flashes same code when powering over USBC.
Neither hdmi outputs anything anymore, with or without SD card. I am willing to remove the hat but I really need to clock out so I'm hoping someone knows the 4-long-5-short code offhand. Couldn't find it in the manual.
Any ideas on what's going on or next steps?
LED warning flash codes - https://www.raspberrypi.com/documentati ... lash-codes
Presumably the RPi[5] was running normally before you added the 3rd-party HAT?
In which case perhaps it is Waveshare that can help?
Someone, apparently on behalf of Waveshare, repeatedly posts advice in these forums -
Example - https://forums.raspberrypi.com/viewtopi ... 3#p2160483
If you have any questions about waveshare products, you can send an email to support@waveshare.com and we will be happy to answer your questions
Statistics: Posted by B.Goode — Tue Jun 18, 2024 6:40 am