I use 5V not for particular reasons but because it is the auxiliary output present on the IonoPi Board. According to what is indicated, this is the output designed for 1-wire devices
This is from the IonoPi Board user guide
This is from the IonoPi Board user guide
Iono Pi has an auxiliary 5Vdc voltage output pin on the terminal block, labeled 5VOUT, to supply power to external 1-Wire devices or other low-power loads. Never exceed the maximum rated current of 50mA on this output.
Statistics: Posted by lucazpf — Wed Jan 17, 2024 7:27 am